Bag Neck Sealer – Blue Steel

Caractéristiques principales

• Bag Neck Sealer for PVC bag sealing tape, OPP bag sealing tape, for 9mm, 12mm tape, max outer diameter 15cm.

Loading insutrions

1. Put the roll of tape onto the Tape Mandrel located at the rear of the machine. Place the tape so it is coming off the Tape Mandrel from the bottom and the adhesive is facing up. If the tape is installed properly the tape roll will spin in a clockwise direction as the tape is pulled.
2. Pull the tape so that is extends past the bag opening area by about 2cm. (See figure 1)
3. Take the neck of the bag and twist it. (See figure 2)
4. Take the bag and push it downwards into the opening area of the sealer It is better to do this at a fast speed. (See figure 3)
5. After the bag is sealed pull it out from the side
6. Repeat process.